<

fieldcommunicator

Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In St

description:Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock...
BASIC INFO

Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock



 



Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock
 

The Fluke 805 Vibration Meter is reliable, repeatable and accurate way to check bearings and overall vibration. Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available.
 

Features and Benefits of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

  • Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure
  • Consistent data quality at both low and high frequency ranges
  • Four-level scale indicates severity of problems for overall vibration and bearing condition
  • Exportable data via USB
  • Trending in Microsoft® Excel using built-in templates
  • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
  • Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
  • Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
  • Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities
  • On-board memory holds up to 3,500 measurements
  • Audio output for listening to bearing tones directly
  • External accelerometer support for hard to reach locations
  • Flashlight for viewing measurement locations in dark areas
  • Large screen with high resolution for easy navigation and viewing

Use the 805 to check the following machine categories: Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

  • Chillers (refrigeration)
  • Fans
  • Cooling tower drives
  • Centrifugal pumps
  • Positive displacement pumps
  • Air compressors
  • Blowers
  • Generic gearboxes (rolling element bearings)
  • Machine tools (motor, gearboxes, spindles, etc.)

 

Vibration Meter of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

Low frequency range (overall measurement)

10 Hz to 1,000 Hz

High frequency range (CF+ measurement)

4,000 Hz to 20,000 Hz

Severity levels

Good, satisfactory, unsatisfactory, unacceptable

Vibration limit

50 g peak (100 g peak-peak)

A/D converter

16-bit

Signal to noise ratio

80 dB

Sampling rate

Low frequency

20,000 Hz

High frequency

80,000 Hz

Real time clock backup

Coin battery

Sensor of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

Sensitivity

100 mV g ±10%

Measurement range

0.01 g to 50 g

Low frequency range (overall measurement)

10 Hz to 1,000 Hz

High frequency range

4,000 Hz to 20,000 Hz

Resolution

0.01 g

Accuracy

At 100 Hz ±5% of measured value

Amplitude Units of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

Acceleration

g, m/sec²

Velocity

in/sec, mm/sec

Displacement

mils, mm

Infrared Thermometer (Temperature Measurement) of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

Range

-20°C to 200°C (-4°F to 392°F)

Accuracy

±2°C (4°F)

Focal length

Fixed, at ~3.8 cm (1.5 in)

External sensor of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

Fluke supports but does not provide external sensors

Frequency range

10 Hz to 1,000 Hz

Bias voltage (to supply power)

20 VDC to 22 VDC

Bias current (to supply power)

Maximum 5 mA

Firmware of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

External interfaces

USB 2.0 (full speed) communication

Data capacity

Database on internal flash memory

Upgrade

Through USB

Memory

Up to 3,500 measurements

Radiated Emission of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

Electrostatic discharge: burst

Standard EN 61000-4-2

Electromagnetic interference

Standard EN 61000-4-3

RE

Standard CISPR 11, Class A

Environmental of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

Operating temperature

-20°C to 50°C (-4°F to 122°F)

Storage temperature

-30°C to 80°C (-22°F to 176°F)

Operating humidity

10% to 95% RH (non-condensing)

Operating/storage altitude

Sea level to 3,048 meters (10,000 feet)

IP rating

IP54

Vibration limit

500 g peak

Drop test

1 meter

General Specifications of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

Battery type

AA (2) Lithium Iron Disulfide

Battery life

250 measurements

Size (L x W x H)

24.1 x 7.1 x 5.8 cm (9.5 x 2.8 x 2.3 in)

Weight

0.40 kg (0.89 lb)

Connectors

USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), 


Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

572-2 High-Temperature Infrared Thermometer 
62 MAX+ Infrared Thermometer 
568 Infrared and Contact Thermometer 
64 MAX IR Thermometer
62 MAX Infrared Thermometer 
59 MAX+ Infrared Thermometer 
59 MAX Infrared Thermometer
568 Infrared and Contact Thermometer 
566 Infrared and Contact Thermometers 
561 Infrared and Contact Thermometer 
568 Ex Intrinsically Safe Infrared Thermometer 
t3000 FC Wireless Temperature Module 
63 Mini IR Thermometer 
61 IR Thermometer 
FoodPro Infrared Food Thermometer 
FoodPro Plus Infrared Food Thermometer 
54 II B Dual Input Digital Thermometer with Data Logging 
53 II Single Input Digital Thermometer with Data Logging 
52 II Dual Input Digital Thermometer 
51 II Single Input Digital Thermometer

 

Model Description of Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

154 HART Communicator
754 Documenting Process Calibrator-HART
753 Documenting Process Calibrator
726 Precision Multifunction Process Calibrator
725 Multifunction Process Calibrator
725Ex Intrinsically Safe Multifunction Process Calibrator
725 Multifunction Process Calibrator
724 Temperature Calibrator
789 ProcessMeter
719 Pressure Calibrator
709 Precision Loop Calibrator
709H Precision Loop Calibrator with HART Communications / Diagnostics
707 Loop Calibrator with Quick Click Knob
707Ex Intrinsically Safe Loop Calibrator »
715 Volt/mA Calibrator »
705 Loop Calibrator »
771 Milliamp Process Clamp Meter »
772 Milliamp Clamp Meter »
787 ProcessMeterTM »
773 Milliamp Process Clamp Meter »
754 Documenting Process Calibrator with HART communication
805 Vibration Meter

Fluke 805 FC Vibration Meter Fluke 805 Meter Vibration In Stock

We are specialized in intelligent instruments, including : control system, transmitters, flow meters,sensors, recorders, analyzers, control valves, controllers, PLC's, etc.
 
We mainly supply Yokogawa, Emerson, Rosemount,Honeywell,Siemens, ABB,FLUKE, Endress+Hauser,Schneider Electric,Moeller,FUJI,Omron, Pepperl+Fuchs, Yaskawa,Norgren,CHINT,Hach,Weidmuller,Phoenix,MTL,SMC,Testo,Rockwell,ASCO,Parker,Mitsubishi, Hima, Hirschmann,Festo,GE, CISCO,Auma,IFM,GM,
Turck,Bently Nevada,MOXA etc.


 
Why do you choose us?
 
1. 100% original brand product, 100% quality assurance.
    If you find a fake product. Please contact us without hesitation! We afford the shipment cost! We send  you a new product asking zero cent.
 
2. Varied payment methods.
    We adopt L/C, D/A, D/P, T/T, and other methods. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!
 
Packaging: Imported with original packaging or standard export packing.Customize design is acceptable.
 
Shipping: By Express(EMS,DHL,UPS,TNT, FEDEX, ARAMEX), By Air, By Sea.
 
Contact:
 
HONGKONG XIEYUAN TECH CO., LIMITED
Email:becky@hkxytech.com   Web:www.hkxytech.com
Mobile:+86-15972186287(Whatsapp & Wechat)


Previous:Fluke 154 HART Calibration Assistant Fluke 154 HART Multifun Next:Fluke 805 Portable FC Vibrometer Fluke 805 FC Digital Vibrat
 Footer begin -->