IFM PM1608 PM-,25BREA01-E-ZVG/US Flush Pressure Sensor Arriv
IFM PM1608 PM-,25BREA01-E-ZVG/US Flush Pressure Sensor Arrived
Product characteristics of IFM PM1608 PM-,25BREA01-E-ZVG/US Flush Pressure Sensor PM1608 Sensor In Stock
Flush pressure sensor PM1608 PM-,25BREA01-E-ZVG/US
Robust stainless steel housing for use in the food and beverage industry
Hygienic, flush design
Resistant to high-pressure cleaning with aggressive cleaning agents
High temperature resistance and high protection rating
Product characteristics
Number of inputs and outputsNumber of digital outputs: 1; Number of analog outputs: 1
Measuring range
-0.0125...0.25 bar-12.5...250 mbar-0.182...3.626 psi-1.25...25 kPa
Process connectionthreaded connection G 1 external thread sealing cone
Application
Systemgold-plated contacts
Measuring elementceramic-capacitive pressure measuring cell
Temperature monitoringno
Applicationflush mountable for the food and beverage industry
Mediaviscous media and liquids with suspended particles; liquids and gases
Medium temperature[°C]-25...150
Min. bursting pressure
30000 mbar435 psi3000 kPa
Pressure rating
6000 mbar84 psi600 kPa
Vacuum resistance
-1000 mbar-0.1 MPa
Type of pressurerelative pressure
No dead spaceyes
MAWP (for applications according to CRN)[bar]10
Electrical data
Operating voltage[V]18...30 DC
Min. insulation resistance[MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Measuring principlehydrostatic
Integrated watchdogyes
2-wire
Current consumption[mA]3.5...21.5
Power-on delay time[s]1
3-wire
Current consumption[mA]< 45
Power-on delay time[s]0.5
Inputs / outputs
Number of inputs and outputsNumber of digital outputs: 1; Number of analog outputs: 1
Outputs
Total number of outputs2
Output signalanalog signal; IO-Link; (configurable)
Number of digital outputs1; (IO-Link)
Number of analog outputs1
Analog current output[mA]4...20; (scalable)
Max. load[Ω]700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA)
Short-circuit proofyes
Overload protectionyes
Measuring/setting range
Measuring range
-0.0125...0.25 bar-12.5...250 mbar-0.182...3.626 psi-1.25...25 kPa
Analog start point
-12.5...200 mbar-0.182...2.9 psi-1.25...20 kPa
Analog end point
37.5...250 mbar0.544...3.626 psi3.75...25 kPa
In steps of
0.1 mbar0.002 psi0.01 kPa
Factory setting
ASP = 0.0 barAEP = 250 mbar
Accuracy / deviations
Repeatability[% of the span]< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation[% of the span]< ± 0,2; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1)
Linearity deviation[% of the span]< ± 0,15; (Turn down 1:1)
Hysteresis deviation[% of the span]< ± 0,15; (Turn down 1:1)
Long-term stability[% of the span]< ± 0,1; (Turn down 1:1; per year)
Total deviation over temperature range
Temperature rangetotal deviation
-25...15 °CCharacteristics deviation ± 0,1 % of the span / 10 K
15...80 °CCharacteristics deviation
80...150 °CCharacteristics deviation ± 0,15 % of the span / 10 K
Notes on the accuracy / deviationfor further details see section Diagrams and graphs
Reaction times
Damping for the analog output dAA[s]0...4
2-wire
Step response time analog output[ms]30
3-wire
Step response time analog output[ms]7
Interfaces
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesDigital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000)
SIO modeno
Required master port classA
Process data analog3
Min. process cycle time[ms]3.2
IO-Link resolution pressure[mbar]0.05
IO-Link process data (cyclical)
Functionbit length
pressure16
device status4
IO-Link functions (acyclical)application specific tag; internal temperature
Supported DeviceIDs
Type of operationDeviceID
default669
Operating conditions
Ambient temperature[°C]-25...80
Storage temperature[°C]-40...100
ProtectionIP 67; IP 68; IP 69K
Tests / approvals
EMC
DIN EN 61000-6-2
DIN EN 61000-6-3
Shock resistance
DIN EN 60068-2-2750 g (11 ms)
Vibration resistance
DIN EN 60068-2-620 g (10...2000 Hz)
MTTF[years]323
Note on approval
Factory certificate available as download at www.factory-certificate.ifm
UL approval
UL approval numberJ022
Mechanical data
Weight[g]304.8
Housingtubular
Dimensions[mm]Ø 30.2 / L = 122
Materialstainless steel (1.4404 / 316L); PBT
Materials (wetted parts)ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE
Min. pressure cycles100 million
Tightening torque[Nm]20
Process connectionthreaded connection G 1 external thread sealing cone
Remarks
Pack quantity1 pcs.
Electrical connection
ConnectionConnector: 1 x M12; coding: A; Contacts: gold-plated
More Models:
EVC810 IIR200 PK5524 EVC005 II0011 EVC004 SI5002 IGT205 O1D100 PQ3834IFS204TA2105IFM216EVF566II5930II5697EVC002IG5596SI5010II5687KF5015VTV122SA5000E21248 PN3094SI6700E30448OY039SEY3099E11855G1501SE11252PM1608AL1930EVC146EVT006LI5131PT5404PN7299PN7209AC1254AC1258SI6800EC2082AL1102UGT524EVC086EVC003 OGH500II5689AC5222AC5218AC5233SU7000PN3093PN2160IM5115SH0500LR2050MVQ101IFC248IFC234IFC220IN5225IFT203O5E700IG6086E12339IGC222EVC714IGW201IF5888 EVC597IM5126IGT220IG5505IG5401EVS023EVC812VTV121IIS204IM0011SM9000IGT213IFT205PN2093PN2094E20005OGE101OGS100PM1506E33403
We mainly supply Siemens, Schneider, Honeywell, ABB, Allen Bradley, Mitsubishi, Omron, Eaton, Pepperl+Fuchs, MTL, Phoenix Contact,Weidmuller, Festo, IFM, Wago, Pilz, Degson, Sick, SMC, Norgren, Yokogawa, Yaskawa, Fluke, SEW, Emerson,Endress+Hauser,Vega, Hirschmann,Moxa, CISCO, Turck, Beckhoff, B&R, Balluff, Bifold, GE,Rittal, Proface, Wintek,Danfoss,EBM, YTC,Hach,Delta, Finder,Wohner, CHINT, Autonics,Testo, Bently Nevada, PR Electronics, Meanwell, Dell and so on .
We are specialized in intelligent instruments, including : Transmitters, Flowmeters, Analyzers,Communicators, Safety Barriers, Sensors,Gas Detectors, PLC(DCS), Multimeters, Calibrators, Communicators, Recorder, Inverters, Positioners, Valves, Soft Starters, Circuit Breakers, Contactors, Rail Switches, Power Supply, HMI, Terminal Block, Relay etc.
Contact:
